Hello everyone, jujst put engine in car and set up cam sensor. Vehicle started immeadiately, had to turn off to address coolant leak and car would not re-start. Re checked cam sensor thinking I may have installed it 180 out. Reset, Casper's cover light came on, car started and once I turned it off, it would not restart again. I installed factory cap and attempted to set with volt meter. I have the requisite 7.5 volts in the blue wire but NO drop when I turn the sensor. Trying to save time, I replaced known good crank sensor and coilpack/module to no avail. Any direction would be greatly appreciated. thanks ahead of time, John.
