no start?

[shmed]

heres what happened blew the headgaskets, had head all checked out all good.
put it all back together, start fires right up but shaking real bad... ok checked a few things start up again okfires up shaking still an sounds like an exhause leak then bang like a back fire thru the turbo.
now now start
checked fuel press its good
ses comes on when key on
no mal codes on scan master
looked at cam sensor its tight took top off all is still tight.
any ideas

 

[PSID6]

How are you setting your cam sensor ?

 

[shmed]

it was preset when we bought the longblock.
should i pull it an reset it?
it didnt apprear or feel loose or movable

 

[v6turbo87]

Are the plug wires connected to the right cylinders?

 

[PSID6]

I would pull it and reset it.

 

[shmed]

wires on correct i triple checked em an numbered them at both ends