Pick a converter for my combo

[BillyBoost]

Need expert help in choosing a converter for the following combo.

Champion iron heads
FMIC
Comp 218 roller
pte 68 q trim
83#
FAST system
200r4 currently non loc but will convert back

I know the stall range needs to be 3400 but looking for someone with first hand experience with what will work.

Car is street raced from a 20 or so roll...looking for spoolup but top end efficiency.

Thanks

Billy

 

[lazaris]

Pro Yank 3400 extreme.

 

[BillyBoost]

is that what you run? Does that one have the torque applied lockup?

 

[Warp6]

hey Billy...

I can show you exactly what a good convertor is supposed to do. Speaking of YANK...I just left your mom's..how about I come to KY and yank your lips off with the Warp

 

[sixgun86gn]

Vigilante 5 disc would be my choice.I have the single disc and it spools almost immediately.

 

[TRENT THOMPSON]

call up bruce at PTS and get a 9x11 converter

 

[lazaris]

Im using a 4000 extreme. All the pro seris have the posi lock up clutch. They dont make any noise at idle like the precisions do.

 

[BillyBoost]

lararis...thanks for your reply. curious to what your combo is? how does the lockup work? Is it compatable with FAST system for lock up?

 

[lazaris]

The converter locks up on it own through inertia at WOT . Under normal driving it locks up like a stock converter. If Felpro supports stock type converter lock up then it will lock under normal driving as well.