Jun 23, 2014 #1 Q QwikStop Wfo Racing Team Rep. Joined Jul 16, 2012 Messages 474 Im using the TRW forged pistons, whats a good ring, Moly, Plasma Moly? Any suggestions?
Jun 23, 2014 #2 J Jay J Active Member Joined Jul 2, 2001 Messages 707 Total Seal. Moly Ductile top ring. Reverse twist cast iron second ring. Weber, among others, sell these...
Total Seal. Moly Ductile top ring. Reverse twist cast iron second ring. Weber, among others, sell these...
Jun 23, 2014 #3 E earlbrown runs with scissors Joined May 26, 2001 Messages 7,539 If you've already had your cylinders final honed, you need to go with whatever ring the finish is setup for. If it hasn't been honed, it's hard to go wrong with a plain ole moly ring on a street car (with PROPER break-in procedure!)
If you've already had your cylinders final honed, you need to go with whatever ring the finish is setup for. If it hasn't been honed, it's hard to go wrong with a plain ole moly ring on a street car (with PROPER break-in procedure!)
Jun 23, 2014 #4 Q QwikStop Wfo Racing Team Rep. Joined Jul 16, 2012 Messages 474 It hasn't been honed yet.
Jun 23, 2014 #5 D David Husek Turbo Buick Performance Joined Mar 16, 2007 Messages 911 Total Seal CR2165-5 for std bore size
Jul 13, 2014 #6 J Jeff Rand Well-Known Member Joined Sep 17, 2001 Messages 1,714 If they are 1/16" rings you have many options but 5/64" is another story depending on bore size.