Power master

[Hec87GN]

Could someone who purchased the "complete unit" from autozone for $144 please tell me what is included with this. Is the E-H pump included? the sump hose? pressure switch? accumulator?

Does anyone have the part number? The guy at my local autozone is not the sharpest tool in the shed.

Thanks in advance!!

 

[BoostKillsStres]

Part # is 52-9702 He should be able to look it up under the powerbooster just like any other car. It comes w/ everything. Unplug the wiring, unbolt the brake lines and the 2 bolts holding the unit on the firewall then undo the clip on the brake pedal and swap units. The brake pedal clip was the biggest pain for me and of course the bench bleed. Mine didn't come w/ the hoses to do the bench bleeding so I asked for one out of a 87 monte mastercylinder box and used it to pedal bleed it on the car as I don't have a vise.
HTH

 

[Hec87GN]

Thanks so much!!

 

[WH1 85]

It includes everything. Got mine back in November and it has worked great.

I't took me 1/2 hour to change the master cylinder. But took me 1 1/2 hours to reconnect the brake pedal. Heres a hint. Bolt the cylinder down to where there is only about an 1/4" play. Then you should be able to get under there and get the clip in.

Any tighter and you'll never get it. Any loser and the m/c will keep sliding to far forward.

 

[boostx]

did it come with the pressure swith ( the right one)