Hey guys, I'm pretty new to Powerlogger so I finally made some runs and I kinda want a second look at things to make sure everything is ok and good to go. I noticed that my tps voltage at WOT isn't where it should be (maybe I need to take out the floor mat). Any help would be greatly appreciated, thanks guys.
Powerlogger file review
- Thread starter jess70502
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
huntsg
Active Member
- Joined
- Aug 10, 2009
- Messages
- 803
It does look like your TPS is low. What chip and mods are you running?
Everything looks good from here, crank up the boost some. 
You should try to get your TPS voltage up a little bit but I wouldn't lose any sleep over it, your still plenty high enough to get it into power enrichment mode. Also, what wideband are you using. A/F showed up in the 8's but that's probably because you're using something different than I am and my PL is set up for an LC-1.
You should try to get your TPS voltage up a little bit but I wouldn't lose any sleep over it, your still plenty high enough to get it into power enrichment mode. Also, what wideband are you using. A/F showed up in the 8's but that's probably because you're using something different than I am and my PL is set up for an LC-1.
