Precision Turbo 67 gtq ball bearing turbo.
- Thread starter rock105
- Start date
Welcome!
By registering with us, you'll be able to discuss, share and private message with other members of our community.
Warp6
Mine since '92
- Joined
- May 25, 2001
- Messages
- 1,882
What compressor cover? 3" in 2" out or 4" in 2 1/2" out? Anything included - water lines, actuator etc?
callmeebryan
Member
- Joined
- Jun 24, 2007
- Messages
- 316
Pictures? Which cover does it have? Water lines included???
Very interested. Please send pictures and contact info to jnguyensmu@gmail.com
thanks.John
thanks.John
callmeebryan
Member
- Joined
- Jun 24, 2007
- Messages
- 316
as a follow up to my previous question, does it have a .63 or .85 turbine?
Warp6
Mine since '92
- Joined
- May 25, 2001
- Messages
- 1,882
waiting
3 inch in and 2.5 out. No water lines included. Unsure if it is a .63 or .85 how do you tell?
Warp6
Mine since '92
- Joined
- May 25, 2001
- Messages
- 1,882
It could be in raised numbers on the exhaust housing - maybe somewhere near the exhaust entry?
Also - are you letting the actuator go with it? If so, is it a high pressure (18psi) or low (13psi)?
Double check that inlet and outlet size - I think they're only available 3" in 2" out (E compressor) OR 4" in 2 1/2" out (S compressor)
Not trying to give you a hard time - just need to know what we have here. Pics would be great. craig@michaelthomas.com Thanks Craig
Also - are you letting the actuator go with it? If so, is it a high pressure (18psi) or low (13psi)?
Double check that inlet and outlet size - I think they're only available 3" in 2" out (E compressor) OR 4" in 2 1/2" out (S compressor)
Not trying to give you a hard time - just need to know what we have here. Pics would be great. craig@michaelthomas.com Thanks Craig
It is setup for a external wastegate. I used the old applied tech one. I am thinking it is a .63 but I will check to be sure. It is in great shape but don't have a way to get pics on my computer. I bought it new from Cal Hartline.
