Pulleys and Brackets (Serpentine)

[GARY HARVEY]

I'm needing to locate a aftermarket source to tie this project together, anyone with input?
Thanks

 

[The Radius Kid]

Yup,I'd contact "Racin" Jason Cramer[the girdle and powerplate guy].

 

[KendallF]

Cal Hartline is selling a nice set of CNC brackets that Champion makes. They have a version for alternator only and one for alt/pwr steering. See http://www.hartlineperformance.com.

 

[GARY HARVEY]

Jasons Ph# or web site

Hate to say this: don't know how to make contact with Jason.

Also, will be needing the A/C setup, which the good people @ CHAMPION,
are working on.

I've made contact with the MARCH Corp., trying to generate interest in getting them to come on board with the S2 project.

Thanks for the help,

 

[86brick]

www.rjcracing.com
801-973-4332 Jason@RJCRacing.com

 

[GARY HARVEY]

RJC does have an excellent set of pulleys.

Now I looking for a used set of brackets for a BMS/S2 O/C.

help... :frown:

My guess is this ain't going to be an easy find.

 

[Mac in SD]

Now I looking for a used set of brackets for a BMS/S2 O/C.

help... :frown:

My guess is this ain't going to be an easy find.

Gary, for a single-turbo setup, you can use the stock bracket. Only problem is the extra support brackets for the a/c compressor (the ones that attach to the header flange on a stocker) will have to be fabricated - the aluminum main bracket is not strong enough to support a compressor by itself. Main accessory brackets regularly come up for sale.

 

[GARY HARVEY]

84' T/T AC Bracket

is the only experence I'm running with. The one I'm using on the current setup (hot air) has been beefed up to the point of being unuseable for this project [if] I'm on the right path. I think I'm needing to start fresh with ALL the brackets Since I don't have any yet...

 

[GARY HARVEY]

AC Bracket needed

Champions' A/C Delete on its way.

I still need a Stock A/C bracket.
Any spares available?

 

[turbo6randy]

Gary
Sent you a PM on the AC bracket. I've also got stock water pump and crank pulleys.
Randy