Pulleys/orange stripe converter/trans cooler more

[TR Custom Parts]

Got some odds and ends for sale. Almost verything seen has come off of my GN. Please, no PM's on this stuff, You want it, say so on this thread. All shipping will be approximate cost to your address. PLEASE BE SURE TO GIVE ME YOUR ADDRESS SO I CAN CALCULATE SHIPPING. You can email me at mhueffman@snet.net if you don't want everyone to see it.

Orange stripe 12" lockup converter, bought from Jack Cotton years ago, approximately 15,000 miles on it. About 30 12 second passes on it at the track with NO forced lockups when racing. Have recently upgraded to a PTC non lockup or it would still be in the car.
$115 plus shipping

GM GNX style transmission cooler, mounts between your radiator and AC condenser, upgraded to a B&M cooler with fan or it would still be on the car.
No hardware included just the cooler as seen in picture. Bought this from Kirban years ago.
$25 plus shipping

Stock crank pulley was taken off my GN at about 15,000 miles
$35 plus shipping

Stock power steering pulley was taken off my GN at about 15,000 miles
$25 plus shipping

Stock intercooler pass side brace
$40 plus shipping

NEW wastegate solenoid, never used.
$75 plus shipping

Used windshield washer reservoir and coolant overflow reservoir as pictured, no caps, not show worthy but an improvement for a daily driver.
$50 plus shipping for the pair.

Hood hinges, took off my GN at around 15,000 miles and replaced with chrome ones.
$50 plus shipping

Fender to radiator support braces, took off my GN at 15,000 miles and replaced with chrome ones.
$20 plus shipping

Silver powder coated shifter knob with adapter, new never used.
$50 plus shipping

Light red shifter knob, almost has an orangish hue to it with Power 6 logo and adapter, new never used
$40 plus shipping

New satin aluminum VACUUM brake master cylinder cap cover with Power 6 logo.
$60 plus shipping

Used polished aluminum overflow tank that bolts to radiator top plate, used this on my GN and recently took off when I went to a Metco fuel cell for my alky kit and now using the coolant overflow reservoir again for coolant not alky! Some slight scratches that don't really show when mounted.
$45 plus shipping

Stock cat converter exhaust hanger, flange has been ground to fit a 3" test pipe flange. Has about 28,000 no bad weather miles on it. No longer running a hanger on my GN.
$50 plus shipping

Stock turbo drain with block fitting, decent shape, taken off my GN at about 25,000 miles
$25 plus shipping

Better pic of master cylinder cover is the last picture.

 

[jack44130]

parts

How much for the over flow can and the exhaust hanger? Thanks, Jack

 

[TR Custom Parts]

$105 shipped to OH

 

[38turbo]

ill take the turbo oil drain w/fitting let me know total shipped and paypal addy

 

[TR Custom Parts]

Turbo drain $31 to IN Paypal address is mhueffman@snet.net

 

[38turbo]

paypal sent thanks mark

matt.c

 

[TR Custom Parts]

Turbo drain sold, shipping on Tuesday. Thanks

 

[ta88gta]

Ill take the:
Used polished aluminum overflow tank that bolts to radiator top plate, used this on my GN and recently took off when I went to a Metco fuel cell for my alky kit and now using the coolant overflow reservoir again for coolant not alky! Some slight scratches that don't really show when mounted.
$45 plus shipping

Price to 98230 thanks

 

[TR Custom Parts]

jack44130 is first in line for overflow, need an answer back from him first.

 

[precizion818]

Of course I react before I read! I sent you a couple of questions on the cooler and hanger

 

[TR Custom Parts]

Rubber is good on the exhaust hanger, not bad for a 23 year old part, slight cracking but nothing to be concerned about.

Everything you see on the cooler is included. Top part wraps around top of radiator, altered it a bit to work with my aluminum radiator. bottom two studs you have to drill holes in the bottom of the radiator support. Goes in between the rad and condenser, it is a GM part.

 

[Sal 87WE2]

Stall speed on converter? Shipping to 77477

thanks!

 

[precizion818]

Rubber is good on the exhaust hanger, not bad for a 23 year old part, slight cracking but nothing to be concerned about.

Everything you see on the cooler is included. Top part wraps around top of radiator, altered it a bit to work with my aluminum radiator. bottom two studs you have to drill holes in the bottom of the radiator support. Goes in between the rad and condenser, it is a GM part.

Shipping to 45011?

 

[TR Custom Parts]

Converter is advertised as 2800 stall, will get shipping quote to you tomorrow.

If I don't hear back from jack44130 by morning I will consider him out and exhaust hanger and polished overflow container will go to next in line. He is online but did not reply to my PM to him.

BTW, on the stock coolant tank, I installed a low level sensor in it for when I used to run a do it yourself alky kit. Just needs to have a couple wires hooked up to it and use the water level position in your dash to show if your coolant is low.

 

[precizion818]

How much would shipping on the cooler be? 45011

 

[artrenee10]

Ill take the wastegate solenoid...
Thanks
Steve Chambers

 

[TR Custom Parts]

Cooler to OH $10 Paypal is mhueffman@snet.net

 

[precizion818]

Payment sent

Cooler to OH $10 Paypal is mhueffman@snet.net

 

[TR Custom Parts]

Exhaust hanger and polished overflow sold to jack44131

Trans cooler sold to precizion818

ATRENEE10 Shipping on wastegate solenoid is $5 Paypal is mhueffman@snet.net

 

[ta88gta]

jack44130 is first in line for overflow, need an answer back from him first.

No problem. Keep me posted thanks