Pump bushing

[HellOnWheels]

Is it possible to R&R the bushing in the pump WITHOUT removing the pump from the trans, if so how????

Thanks,
Jerry

 

[WE4]

ah... sorry but... no

Is it possible to R&R the bushing in the pump WITHOUT removing the pump from the trans, if so how????

Thanks,
Jerry

Sorry Jerry, you need to pull the pump to install the bushing. Also if you have a 690 casting you are fine, but if you have a 149 or a 082 casting you may want to stake the bushing in so it cannot walk out.
Just a tip
Good luck
Bruce
We4
Performance Transmission Services