pushrods and lifter

[Lee Thompson]

Used last season--Comp 853 Hyd. roller lifter--$165 shipped
1 set of used 5/16 Comp 8.225- .080 wall pushrods---$50 shipped
1 set of used 5/16 CV Product 8.500--.080 wall---$50 shipped
1 set of used Comp 8.700--.080 wall--$50 shipped--used with the above lifter on TA heads
2 sets of NEW 3/8 No Name 8.750--.060 wall--$65 shipped--These are the correct length for TA heads and Hyd. roller lifters.
1 set of USED CV 7/16 -- 8.450--$65 shipped

Ford Powerstroke Intercooler with 3 in. pipe---SOLD

 

[Eticket]

Hey Lee,

what are you doing? going to solid roller cam? I was thinking about going down to a hyrdraulic roller and may be interested in some lifters and pushrods.

John

 

[Lee Thompson]

Not exactly

Going to the Comp 885 lifters---You probably wouldn't want the 853s-- don't believe they will rev high enough for you--Pushrods you could use. What heads do you have? I have set of 7/16 --.125 wall pushrods that I am going to see if I can fit them in my TA heads Shouldn't do any flexing.

 

[Blazer406]

Going to the Comp 885 lifters---You probably wouldn't want the 853s-- don't believe they will rev high enough for you--Pushrods you could use. What heads do you have? I have set of 7/16 --.125 wall pushrods that I am going to see if I can fit them in my TA heads Shouldn't do any flexing.

Lee,

Would they work good for a 206 roller or a 210 roller? I am looking to go roller at some point.... but mine is a street car first... race car only 5% of the time...I really don't want a lopey idle... or poor fuel economy... but do want a hyd roller.

-Brian

 

[Lee Thompson]

Lifters

Lifters are sold--Thanks

 

[49-blues]

Lee- how high will the 853s rev? what about the 885s?

 

[Lee Thompson]

Hell if I know !!

Had the 853s to a little over 6000 but the experts @ Comp Cam said I would need the 885 since I plan on going a little higher RPM thei coming year (6500). I hear @ high rpms the 853 don't have a fast enough bleed down rate and can leave the valve hanging open somewhat. Calls for .004 preload on the 885 and they are reported to be noisier than the 853. That's all I know. But what ever you do you will need some of my pushrods.

 

[49-blues]

Lee i would have taken the lifters but i guess someone beat me to it. what length rods should i need for a comp roller cam,853 lifters and champ iron heads?

 

[Lee Thompson]

pushrods

The (used) 5/16 Comp 8.225 --.080 wall---should be the correct length.

 

[PowerKraus]

Stll have <<1 set of used 5/16 Comp 8.225- .080 wall pushrods---$50 shipped>>

Thanks !

 

[Lee Thompson]

pushrods

Yes.

 

[PowerKraus]

sent PM