Race ported 8445 heads newly done

[sdteb]

ferrea big valves....will have pics hopefully tomorrow...cut for roller rockers also.....may also sell brand new harland sharp roller rockers 1.60's with heads ....

 

[8AV8]

$?

 

[imjoesnuffy]

Can I get pics to realjoesnuffy@yahoo.com

 

[buttonfly]

heads

ill take pics and $

 

[BlackBandit]

I'd like pics and price as well. Also, do you have any flow numbers and have the valve towers been mackined for a higher lift cam? Please let me know. james

boosted@mangysquirrel.com

 

[sdteb]

will get pics....

they are at the machine shop...will try to go buy there tonight...i will see if he will flow these for me...and get all the answers to the questions..

 

[sdteb]

will have to post on my site

the pics i took are too large...i am looking to get 850 out of them...will have to go take them and pay to have them flowed...

pics should be up tonight...

 

[sdteb]

pics online !@!@#@dial up beware@@@@!!!

www.shandy.com/heads

before you guys say anything about the gasket marks please read on..these were bolted up ready to go in when i bought the new rods from dls...then i purchased the champion intake took the motor back apart to rebalance with the new rods..

...well i am selling these for a seat of gn1's...
www.shandy.com/newmotor
from the pics of them on my new motor...trust me they have never been run..i am going try and pay the local guy to flow them on the flow bench since people want to see them....

 

[11.20n1320]

rocker arms

Are the rocker arms still there?Would be interested in them.

 

[sdteb]

flow numbers and price..

218/181 for flow numbers....$750.00......sorry this took a while...very busy here...

 

[Jeff Strube]

Do these Heads have 1.77 1.50 Vavle the Flow Number is that at .500 Lift

at 28 inch that 218/181

 

[sdteb]

yes

to all of the above...

 

[Walt03]

Do you have the flow numbers from 050 through .450 on IN and EX.
What kind of Valve springs and specs?
Who did the porting work?

I live in Brentwood
Thanks

 

[sdteb]

port work

done by a guy at rpm out of clarksville...i will have to get the guy at the shop who flowed them to give me the rest of the numbers...he flowed them for me..as i dont have a flow bench...did not know of any other tr owners in middle tn as they hide quite well from the world..good to know there are others out here...if you want valve springs with them i will get a set of the comp or kirban lt1 style...these dont come with springs....are you seriously interested walt because i will be in franklin tomorrow at a wedding or i could bring them to work..these have bronze guides...three angle race valve job...etc etc etc...very nice heads...they are also ready for roller rockers for however might need them...

 

[sdteb]

heads and rockers are sold....