Racetronix Fuel rails

[tufftone777]

I’m currently installing the Racetronix fuel rail on my 87 GN, I have the Teflon coated V3 lines and need to know what adapter or AN fitting is needed for the rail on the passenger side that has the -8 opening? The fitting on my fuel line is too small and goes to the stock rail.

 

[pacecarta]

-8 male to 8orb for the rail Adapter, -8 AN ORB Male to -8 AN JIC Male, Black (ADF-495103): AN JIC Male » AN ORB Male Adapters
(this is listed as add on on the rtx site under the rails)
hose needs a 45 -8 female hose end for the rtx hose , another brand of ptfe hose fittingt might work but its best to stick with rtx

or you could put the hose end back on and use the rtx 8an to saginaw femal on the rail (needs an oring and may need to trim the taper end off but it shouldnt matter)

Adapter, -8AN»M16x1.5 Saginaw Fml, BLK (ADF-8JM1615SGF): Power Steering - Fuel Line Adapters

Purchase Adapter, -8AN»M16x1.5 Saginaw Fml, BLK or shop other Power Steering - Fuel Line Adapters and Racetronix products.

www.racetronix.biz

(also listed in the add ons on rtx site) Fuel Rail Kit, Turbo Buick V6 G77 Black (Regulator Mount) (FR-G77BK-R1): FUEL RAILS - Aluminium | Racetronix

 

[84gbodyss]

Hello I am still running the stock fuel line going to it.This is how my setup is:

 

[84gbodyss]

I can see if I can find the part numbers.I know it’s an ORB -8

 

[84gbodyss]

Looks like pacecarta posted the correct part number.

 

[84gbodyss]

These are all the part numbers I used for my install:

REG-G7B1 = quantity 1



ADF-495111 = quantity 3



INJ-G77 = quantity 1



ADF-8JM1615SGF = quantity 2



ADF-6JM1615SGF = quantity 2



ADF-6JM1415SGF = quantity 2



ADF-6JM101SGF = quantity 2



FPG-RTB00100 = quantity 1