rear stainless steel teflon brake line help.

[karolko]

I was wondering if anyone could point me in the right direction and tell me where they bought there stainless steel braided teflon brake line that gos from the frame to the axle.

I would like to find one with a similar end on the axle and a -3 MALE end on the otherside.

Any pics or ideas would be great.

Thanks alot guys,

Adrian

 

[gnxtc2]

I made mine up using Earl's Speed Seal hose and fittings.

I converted the frame fitting to a -3AN male with an adapter fitting.

Billy T.
gnxtc2@aol.com

 

[La8agn]

I used "Russell" brake line kit #692100. The kit came with all three lines- 2 front and 1 rear. I'm not sure if they sell the rear seperate. You might have to fabricate it yourself. The "Russell" lines are a direct bolt in and are DOT approved, keep that in mind.

 

[karolko]

yeah i think i am going to just go with a regular -3 female on both ends and just make a distribution block for the fluid to go to both sides.

Thanks alot for the help guys,