Replacing Axles

[QuickWrench]

I'm replacing the stock axles with a set of Moser's. Anybody have any common things to look for, or common problems with the procedure?

Thanks...

 

[REDS HOT AIR]

cross your fingers the little bolt that holds the center pin in the carrier isnt broke(the 5/16 head one)

and look for any metal in the oil if all looks good you should be fine.

if the lil bolt breaks it will leave the last thread on it so it will have to be screwed out just wiggle the center pin around while you take a pick or the point of a test light and try to get the lil bolt to spin out.