Requesting Advice On A Fuel Pump Purchase

[84GNwith87eng]

Racetronix - Which kit should I get if I have an '84GN with an '86-'87 engine? I'm not sure what year the engine is

Thanks

Chris

 

[Racetronix]

Originally posted by 84GNwith87eng
Racetronix - Which kit should I get if I have an '84GN with an '86-'87 engine? I'm not sure what year the engine is

Thanks

Chris

The engine does not matter. It is the color of the wires coming out of your sending unit as shown in our ad.

 

[84GNwith87eng]

Gotcha, looked at mine and your information supplied on the site makes it easy to tell, thanks!

 

[Red Regal T]

Originally posted by vitaman2
Instead of paying an extra $60+ (for additional parts like paper clip & test wire)
I chose to buy the complete plug n play kit from Full Throttle & Speed for $99 shipped to my door

My car was already hot wired so I opted for Full Throttles Walbro pump kit. It was $99 shipped as above. I just installed it this afternoon and it is, in fact, plug and play. On the fuel pump hanger, the original plug that plugs into the factory fuel pump plugs into an adapter jumper that plugs into the new pump provided with the fuel pump kit, so nothing to confuse anyone.........even me.

 

[Racetronix]

Originally posted by Red Regal T
My car was already hot wired so I opted for Full Throttles Walbro pump kit. It was $99 shipped as above. I just installed it this afternoon and it is, in fact, plug and play. On the fuel pump hanger, the original plug that plugs into the factory fuel pump plugs into an adapter jumper that plugs into the new pump provided with the fuel pump kit, so nothing to confuse anyone.........even me.

This in-line adapter does not work with the G75 senders. It retains the aged / questionable G77 in-tank wiring and adds another connection to the picture. The 400-1016 is a generic GM installation kit not specific to the TR's.

 

[Red Regal T]

You're right........I did have to retain the original wiring. I was lucky......... it appeared to be in good shape. At first I thought I was going to have to do some splicing but then realized the original pump plug plugged into the included two wire harness. Thanks!