Scanmaster bL

[Turbobee]

Need some help. My T/R scanmaster bL readings have been very high for about a week and a half. Measurements at idle is between 146 and 150. Measurements before these high readings were between 128 and 136. I'm thinking that I'm running lean and should increase fuel pressure. Line off pressure is 43 and line on is 38. Before I mess with car, request your opinions on what could cause this problem. Car is not running right at WOT but seems okay at less than WOT.

 

[turbojd]

Check all your vacuum lines to make sure they're not rotted, and check for any possible exhaust leak.

 

[Turbobee]

Thanks turbojd for your quick advice. I'll give your advice a shot and hope this helps fix problem.