Stage I 3.8 block standerd bore #012

[psiedv6]

I have a stage I 3.8 off center block that is a standard bore, standard deck height, with the #25500012. I have had this for 8 or 9 years and have never used it and don't think i will. $2200.00 or best offer

 

[750H.P.V6]

TTT

 

[nailheadpowered]

ttt hey robert when i grow up ill have to get one of your stage motors! till then here's a ttt for ya good luck.

 

[psiedv6]

I am getting alot of PM's and questions about this block. So I will try to list some info on this post with pictures.


1-this is a 3.8 stage 1 with the casting #25500012
2-this can have the stock oiling system
3-this is a off center block and standard deck height so your stock intake will bolt up with no problem
4-this can run whatever stoke crank you have as long as the pistons and rod go with your combo
5-this is standard bore 3.800
6-this is a two bolt main block with ARP main studs
7-this dose not even have the extra head bolts drilled or tapped yet
8-there is no cracks or damage what so ever
9-this is alread machined and ready to go but if you want the 14 head bolts, you will need to have them done.

hear is some more info http://www.gnttype.org/techarea/pictureguides/blocks/blockguide.html

 

[psiedv6]

bump

 

[psiedv6]

$1999.99 :biggrin:

 

[750H.P.V6]

Sounds like a pretty good deal. There's one on the other board for $3k and it hasn't been machined yet.

Good luck.

Neal

 

[psiedv6]

Sounds like a pretty good deal. There's one on the other board for $3k and it hasn't been machined yet.

Good luck.

Neal

Like I have been telling some of these guys, they can wait for a Champion block and pay $2700-$2800 and then pay $800-$1200 more for the machine work. :biggrin:

 

[psiedv6]

I have three people who want this, so the first one that sends me $1800.00 + shipping will get it and if you send paypal add 3%. This is the lowest I will go or I will keep it for a spear.

951-780-4633 home
909-772-3194 cell

thanks
Robert

 

[psiedv6]

sale pending

 

[bilt2run]

probably too heavy to throw and not at all sharp nor aerodynamic

 

[TURBOELKY]

probably too heavy to throw and not at all sharp nor aerodynamic

thats funny, did'nt see it at first
good luck on the sale.

 

[psiedv6]

I have three people who want this, so the first one that sends me $1800.00 + shipping will get it and if you send paypal add 3%. This is the lowest I will go or I will keep it for a spear.

951-780-4633 home
909-772-3194 cell

thanks
Robert

SPARE damb I need read it before I post next time. That's is funny