By registering with us, you'll be able to discuss, share and private message with other members of our community.
SignUp Now!dice64 said:What is the going price of a stage 2 block in decent shapeThis would be my last project build for the GN :biggrin: Would like to go low 10s to high 9.90 range.
Big Stu said:From what I've seen and paid for them: between $900-$2000 for a really nice block. You going off or oncenter?
Big Stu said:From what I've seen and paid for them: between $900-$2000 for a really nice block. You going off or oncenter?
750H.P.V6 said:Stu,
I'd like to buy a couple of those $900 blocks.I've never seen anything worth using for less than $1500 myself. Really nice blocks without excessively large bores, sleeves, weld repairs etc. are usually $2k +.
Neal
750H.P.V6 said:Stu,
I'd like to buy a couple of those $900 blocks.I've never seen anything worth using for less than $1500 myself. Really nice blocks without excessively large bores, sleeves, weld repairs etc. are usually $2k +.
Neal
TurboDave said:What's wrong with sleeved blocks??![]()
![]()
I have a NOS aluminum block all sleeved up, never used (new). Is it junk?![]()
TurboDave said:What's wrong with sleeved blocks??![]()
![]()
I have a NOS aluminum block all sleeved up, never used (new). Is it junk?![]()
TurboDave said:What's wrong with sleeved blocks??![]()
![]()
I have a NOS aluminum block all sleeved up, never used (new). Is it junk?![]()
buickstage II said:hey everyone,
i came across this surfing evilbay,
http://cgi.ebay.com/ebaymotors/2-ea...ewItemQQcategoryZ26437QQitemZ4590898939QQrdZ1cheers Simon
ps, does anyone know what this block is?
Late style oncenters from what it looks like to me. Pretty nice.buickstage II said:hey everyone,
i came across this surfing evilbay,
http://cgi.ebay.com/ebaymotors/2-ea...ewItemQQcategoryZ26437QQitemZ4590898939QQrdZ1
cheers Simon
ps, does anyone know what this block is?
He probably is referring to the M&A stage 3 heads they sold for a while. Or he is just an idiot.....BAGN said:This is the description...
1.Experimental use only. King Air overhaulded 84" prop. new spinner. 2. Ross 3.17-1 PSRU new. 3.Low profile induction intake manifold.-new. 4. Motec total engine electronic management system. 5. 2 each Buick hi nickel racing engines new parts-never run 272 cu in. 6. Stage 3 aluminum heads-new. Wisco pistons Carillo rods- new. 7. Shop receipts. align bored, etc. 8. gaskets, hardware, etc close to 1,000# total. 9. $24,000 invested-have receipts.
I want a set of those Stage 3 heads ?!?![]()
Big Stu said:He probably is referring to the M&A stage 3 heads they sold for a while. Or he is just an idiot.....![]()
![]()