STAGE2 HEADS & INTAKE 4/Sale

[49-blues]

I have a set of aluminum stage2 #31 heads with 2.08" intake valves & 1.65" exhaust valves , they come complete with springs , retainers , valve covers , T&D roller rockers , lifters and pushrods plus a unmodified Buick Motor Sports off center carb intake -everything in great shape, there was a minor repair under one of the valve seats in one head which was professionally rewelded and new valve seat installed. Looking for $1500. for everything, only selling cause i dont believe i ll ever have the opportunity to build a full race stage2 motor. for any further info call- Matt anytime 347 680 8642-partial trades considered. thanks. also have a pair of exhaust header flanges and beginnings of pipes to build your own headers and maybe a set of header spacers go with the package.

 

[androboost4]

I have a couple of questions, who made the heads, what ratio are the rockers,have heads been used or tested since the repair ?
I would like some pic's too, if possible .

 

[49-blues]

The heads are Buick Motor Sport Stage 2 aluminum heads-I think the part number is 25520031 , the T&D roller rocker ratio is 1.65, I can get pics this weekend for you, they have not been used since repair was made but I'm sure everything is alright-there was a little gauge in head chamber just below valve seat because of a broken valve stem, the same valve seat was replaced with a new one-it maybe possible to have Bobbie from RPE to check them out and reassemble if needed.any other questions-Matt 1-347-680-8642.thanks PS-these heads originally were on a $25K motor built by Wegner Racing that saw 8000 rpms all day long.

 

[davinci50]

Need anything in trade? Rims/tires?

 

[49-blues]

What do you have? You can call me anytime over the weekend and we can talk about it. The heads are in the Poconos, PA so I could possible deliver them or meet halfway. Matt 347 680 8642.

 

[49-blues]

I ll take some new pics this weekend. I could use a forged 3.400 crank, good after market driveshaft with 1350 yokes, new racetronix or reds fuel pump, ptc 3000-3200 lu stall converter, mt drag radials either 295x55x15 or 325x50x15s,t 66 bb turbo, or something in the 6262 or 6265 range.also need a rjc 325 fmic.

 

[49-blues]

Pics sent to interested parties-let me know if you want them.