Well after a new pump install, I am getting the same thing I got before I took the old one off. When you turn the ign. to the on postion sometimes the powermaster will run and sometimes it won't. I have pumped the pedal 10 times with ign. off, and turn ign. on and the pump will come on and run for about 10 seconds, try it again the pump won't do nothing. But if I let it sit there with the ign. on, eventually the pump will start running but will cut out like its loosing power. What could be the issue there? I am at my wits end. I thought it was the pump now I am thinking it could be the switch as I removed the connector and can see what looks to be some brake fluid in the top of the connector. Would that cause the pump to act up as it is doing?
Thanks
Thanks