Stock repacement hoses for a hot air

[Frank Darcy]

Does anyone know where I can get the stock replacement, formed hoses used on a hot air car. I am installing new injectors and would like to replace the stock hoses while I have the car apart. I looked at Gbody, Kirban, NAPA, and a few other vendors listed and I don't see anyone who caries these hoses. THKS! :smile:

 

[BRAD_PADGETT]

The lower radiator hose is the same on the 84-87 Regal Ttypes. This should be easily found. The upper radiator hose is no longer made. I used a NAPA 7899 and it works and looks fine. You may have to cut one end a little bit. Take-care. Brad

 

[O SO LO]

I got my hoses from NAPA as well.

 

[Waco84GN]

I got 86 / 87 radiator hoses

I bought 86 / 87 radiator hoses for my hotair. I am using the 86 / 87 radiator which is longer. The lower hose is for sure right. The 86/7 upper hose works by trimming the thermostat end about 3-4". For the bypass hose, I used autozone #3009 cut to fit. The rest of the heater hoses were all gates hoses from oreilly's I can probably get the numbers for you if you want them. All of the hoses are cut to fit, so I had a lot of searching time in on the hoses.

Just shoot me a pm if you want me to check for the heater hoses as well.

Jerry Berger

 

[Jerryl]

A few threads from a search.

http://www.turbobuick.com/forums/ho...-i-need-correct-upper-radiator-hose-help.html

http://www.turbobuick.com/forums/hot-air-non-intercooled-tech/267095-heater-hoses.html

http://www.turbobuick.com/forums/ho...if-new-84-85-top-radiator-hose-available.html

http://www.turbobuick.com/forums/ho...adiator-heater-hoses-getting-serious-now.html