suspension ?

[WeSS]

I have bad upper control arm bushings. I was thinking of replacing them with a kit from summit made by energy suspension. Any ideas or suggestions? I want it done right so I ask the people who have been there & done that before.

 

[Kent C]

I bought there Hyperflex kit which incudes all the bushings for front and rear. The bushings are not that bad to install, but they must be pressed in and out. I have a press so it was no big deal but any shop should do this for you quite cheap. the most important thing is use lots of grease that comes with the kit or you will have squeaks......ask me how I know........Remember to get an alignment when your done.