TA Heads

[turbobuick]

This a new set of TA heads ported assembled, flowed and ready to go. They flow 272 cfm on intake at .600 and 28". Springs are set up for a solid roller cam. They have 2.02/1.60 Ferrea super duty SS valves. Will have to be used on a large bore motor and will not clear a 3.8" bore motor. I will give all specs to serious buyer. Everything is new and the heads have never been bolted to a engine. I do not have the rockers but can get them. This is for the heads, valves, springs, retainers etc. Completely assembled and ready to rock. $2400 shipped lower 48 Firm.

 

[tcbscott/86-7tt]

heads

Who prepared the heads, do you have any pics. Thanks, Mike

 

[49-blues]

Will they work on any 4.1 blocks? 8 or 14 bolt?

 

[turbobuick]

Yes I don't see why not.

 

[Scott231]

They are 14-bolt heads, but you can use only 8 or 11 as the case may be...

 

[turbobuick]

Who prepared the heads, do you have any pics. Thanks, Mike

They were done by Kip Asplund. I don't have any pics they will be at the NATS. Is there anything in particular you are looking for in a pic?

 

[turbobuick]

ttt, They didn't make it to BG and I still have them. I find it hard to believe there is a waiting list for these heads

These are new no issuses ready to go. If you are looking for a good head that flows a ton and you don't have to wait, here they are!

 

[turbobuick]

ttt