tell me something good

[newhotair]

i bought a hot air car with alky already on it ,it still had the factory boost gauge so i put a after market one on now alky will not come on when driving i know the pump is working could it not be working cause i unpluged the factory boost gauge and one more thing i put a intercooler on but the alky nozzle is still on the cold air intake dont i need to put the nozzle on the pipe coming from the intercooler going into the intake

 

[Razor]

i bought a hot air car with alky already on it ,it still had the factory boost gauge so i put a after market one on now alky will not come on when driving i know the pump is working could it not be working cause i unpluged the factory boost gauge and one more thing i put a intercooler on but the alky nozzle is still on the cold air intake dont i need to put the nozzle on the pipe coming from the intercooler going into the intake

Whose alky setup is it? Every kit is different.

 

[newhotair]

yours

 

[QUIP'6']

i bought a hot air car with alky already on it ,it still had the factory boost gauge so i put a after market one on now alky will not come on when driving i know the pump is working could it not be working cause i unpluged the factory boost gauge and one more thing i put a intercooler on but the alky nozzle is still on the cold air intake dont i need to put the nozzle on the pipe coming from the intercooler going into the intake

sounds like you lost the map signal

 

[Razor]

sounds like you lost the map signal

I would agree

My kit activates off the 3 bar map sensor signal. Make sure it has a hose hooked up to it and that it has 5 volts on it's gray wire