Tips on changing heated O2

[GNICETRY]

I have to change from Casper's old sensor to his new heated O2. Can someone please tell me what tools I need? The socket with the long slit in it and some anti lock lube?

 

[GNICETRY]

NO One has changed their O2?

 

[MSDGN]

I just use a 22M open end wrench...never used anti-seize...if you do make sure you don't get any on the element...

 

[TurboDave]

I seem to recall my O2 wrench is a 7/8" open end.
It helps to remove obstructions like the turbo heat shield, and any valve cover vent plumbing, etc.

 

[U1ARUNIT]

Use anti-sieze sparingly. It makes it easier to remove next time.

 

[GNICETRY]

OK. Took turbo heat sheild and breather off. Still can't get the wrench anywhere near the sensor. The wires are pressed against the water hose coming from the plenum. Do I use a short 7/8" wrench from underneath or take the hose off the metal feed to gain some room????

 

[TurboDave]

Don't know why there should be such a problem, it's easy to reach from the top, down behind the turbo. Just requires flipping the wrench on every turn because there limited swing space.
You might want to find a Turbo Regal owner near by that can show just how easy a job it is.