N
NastyGn
Guest
I find this post intresting. I have just pulled my heads because I started to put some pressure into the rad and found some small tracking in the gasket to the water passage. That problem will be addressed.
I had the heads sent over to the head shop be freshened up ( after 2 years and about 60 runs) and was told that all the SS exhaust valves are bent from heat
I will be changing them to the inconel. It makes me wonder how long they have been dameged? The car has run high 9.80's to a best of 9.71 so it will be intresting to see the improvment with the new valves.
Take Care
I had the heads sent over to the head shop be freshened up ( after 2 years and about 60 runs) and was told that all the SS exhaust valves are bent from heat

Take Care