To start tuning w/ smc......

[grey1]

Is there a basic method of tuning with this? I got it hooked up yesterday. Put the 100+ J.L. chip in (23deg) and made a couple passes. Straight S-L-X, pump speed on full. Turn on point about 10lbs. Turned boost up to 19 and got no knock. Then my knock detector would light a green light then yellow, so I would let off but my knock detector now is not re-setting. I do have an on-off switch hooked to it, but for some reason it won't reset any more. I have T.L. but didn't have it hooked. My motor wasn't bogging out at full pump speed. I set my F.P. at 47lbs. line off.
When I hook up T.L., how should I start? Thanks, Dave

 

[WSLN 6]

With the same basic combo as yours (Substitute 868's for the 43's) a friend of mine runs 25psi + with no knock on 91 octane gas.
Pump speed full, turn on 11psi.
He is also running the JL 23 deg chip.
You are probably running pig rich with the boost that low, start cranking the boost, and watch for knock.

JMO..........