Trans brake question

[Turboo231]

Does anyone offer a electronic style trans brake for 2004 r yet. Thanks for your help"

 

[kidglok]

lonnie does,

http://www.extremeautomatics.net/2004relectrictransbrake.aspx

 

[captflash]

lonnie does,

http://www.extremeautomatics.net/2004relectrictransbrake.aspx

And it works damn good!

 

[Turboo231]

Thanks for your replies. What mods to valve body are needed?

 

[captflash]

Thanks for your replies. What mods to valve body are needed?

That is way beyond my pay grade but go to Lonnie Dier's site, extremeautomatics.com and he explains it clearly. From what I read it is easily installed on the 200-4r but I bought his Stage 3 with the brake installed and it's awesome.

 

[c n avoid87]

lonnie does,

http://www.extremeautomatics.net/2004relectrictransbrake.aspx

Is that the one u put in first n it locks? Then just slap it into D?

 

[BGNeXtreem]

No it's a whole different beast your talking about a stage right brake he sells that too I believe and they both work great of course the electric brake is easier and faster releasing

 

[c n avoid87]

No it's a whole different beast your talking about a stage right brake he sells that too I believe and they both work great of course the electric brake is easier and faster releasing

Oooh, my car came with that one, is just hard to get it right while staging..but is nice for street racing..

 

[kidglok]

Oooh, my car came with that one, is just hard to get it right while staging..but is nice for street racing..

if you get a ratchet-style shifter (like the b&m quicksilver) you can put it in first and just slap it foward. Impossible to miss a gear.

 

[captflash]

Lonnie now only sells his trans brake.Extreme Automatics (New Transbrake)
The Only Pressure Release Transbrake for the 2004R. We spent many hours R&D to develop a transbrake with no down sides. We were looking for a transbrake that could be installed on any valvebody with consistent results. This transbrake can be installed with any valvebody, any shift kit and can be installed by the end user. Can Be used with the stock pan.

Pros - Fast release, Trans still retains full automatic function, Can be used dual feed or regular feed 3rd, Holds Low clutch to prevent low roller clutch failure, Can be installed by end user, Transmission will operate under all conditions even if brake or feed line fails, Transmission will not be damaged if feed line fails, Retains full automatics shifts, Can be installed on every single 2004R valvebody shift kit separator plate etc., Can be removed or reversed, No internals mods to the trans are required, Transmission does not need to be shipped to the builder for installation.

 

[hungerbuhler1]

This is a bad a$$ tranny he makes. My problem is you have to have it in 1st then as im shifting i have went past gears before .

 

[c n avoid87]

Yea it is cool, like he stated maybe we need a different shifter, cuz i have skip gear too, so what i do is trow it in D, the few times that i have use it.