VACUUM BRAKE CONVERSIONS FOR Turbo Regals

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
red regal is straight up

I was in a hurry for a brake kit and didn't ask before I sent my money if he could send one next day...he couldn't. But he sent my money back immediately. He didn't have to but did. Thumbs up to somebody won't put the screws to you once they have cash in fist. I cant imagine him not delivering what he says and NO hes not paying me
 
John is a great guy!
I've had my vacuum brake set up for at least 3-4 years now. I got mine from John and I have not had a minutes problem out of it, so you can rest assured that what he has is mint and will work just fine!
 
Hey guys, thanks for the kind words. The little I make selling parts isn't worth screwing anybody. To me, on this board, the customer is always right. ;)
 
Hey John, just finished up the conversion and everything works great, thanks again! John is a great guy to deal with!!
 
vacuum brakes

Hi John: I see you ad about the vacuum conversion and woundered if this applies to an 85. Do you get the vacuum off of the throttle body. If so do you provide the vacuum plate that fits a 85GN throttle body. If not do I need only one vacuum line that is not in use to perform the vac. duties? Thanks Turbo 85..
 
Yes, you can bolt in the vacuum brake system. You'll need to get vacuum by teeing into the PCV valve 3/8" vacuum line. There may be a better spot to get your vacuum but I'm not that familiar with hot air setups. Pose the question in the brake forum. I'm sure you can get more information. ;)
 
Back
Top