water line kit

[2toneNV]

I know that Precision is re-tooling there water line kit for the turbos. Does anyone have one or know of someone that may have a kit still out there? My builder would rather use that kit and his way of fixing the brazing flaw is welding around the banjo fitting.

 

[DCVING 6]

http://www.turbobuick.com/forums/turbos-turbo-related-parts/261375-water-cooled-turbo-plumbing.html

Check out what Russ Merritt did on post #14.

 

[jerrad]

I beleive Cottons and fullthrottlespeed still have the kits.

 

[disco stu]

http://www.turbobuick.com/forums/turbos-turbo-related-parts/261375-water-cooled-turbo-plumbing.html


Check out what Russ Merritt did on post #14.

I've done it about every which way, even like that. Which looks nice. But when I get done with prepping, welding, tapping, the cost of hose and hose ends and to assemble them, he is going to have at least as much in it as the line kit costs. And I just like the clean simplicity of the hard lines. Just trying to keep simple for me and cheap for him. He did find some BTW. Thanks guys.

 

[TurboJoe3.8]

14mm Banjo Fitting Set for coolant lines - 3/8" Barb: atpturbo.com

These work real well, and are much cheaper than the kit.

:biggrin:

 

[Russ Merritt]

It was 79.59$ for the parts including shipping and if your doing it with the motor out of the car, it's 20min was worth of work. Not that bad with the motor in the car but def a little more involved. Gotta remove the upper and t-body. I didn't have to weld anything.