You can type here any text you want

Wb02, Alky & Afr

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!

LBS Blown Buick

New Member
Joined
Apr 11, 2002
Messages
7
Not shure where to post this so here it goes.

I was woundering what AFR to run at WOT with a 50% water/ ALKY injection mixture.
It seems to richen the mixture at the WB02.

this is a supercharged 355 smallblock in my Camaro.
9.5 CR 7psi boost.

Normally a 12.5 to 1 for Gasoline.

Its seems that maybe a 11.0 to 1 with the Water/Alky injection
on is more in line.

Thanks
 
That depends on a lot of factors..ultimately its what the car responds too better..case in point..my car hates water mixed with the alcohol...with its current state of tune..doesnt mean I cant get a water mix to work with it.

Use your EGT and watch for detonation..get it as close to 12.5 without detonating..without a knock sensor..good luck...spikes in the EGT will usually be detonation..

HTH

May try staright denatured and see how the car responds with a little less fuel pressure..since denatured burns..
 
Back
Top