What size injectors for my setup

[TwinyTwin]

Just wondering on what kind of injectors I should be running with my setup. Right now I am running 75# low imp. with a TE63-1 turbo, walbro 340 pump w/hotwire, Accufab AFPR, 3" full exhaust, and nitrous. I have been told that the 75# are a little over kill and that I should run 55# injectors. If anyone could please tell me which injectors that would be great for my car I would really appreciate it.

 

[83ttypecooled]

whoa!

Hi,
You are out of my league, pal. Maybe you need that 75 pound shot, if you are running nitrous. Frankly, I don't know. Good luck, don't go Kaboom if you can help it.

 

[galoush]

I ran a 100 shot with success many times on 42s but i also was using it with an Inline Areomotive pump and through #8 lines . Id recommend Eric at turbo tweek for a chip for that . The Nitrous has its own Fuel so i dont htink the injectors are big factor , just use good gas and make sure you have enough fuel to the rail , one pump i personally would be a little leary myself .

 

[Race Jace]

how fast are you going? they sound fine to me.

 

[TwinyTwin]

I am wanting to go into the 10's

 

[Race Jace]

what intercooler, heads, cam, converter, tranny ect. you really only listed half of your combo.

 

[TwinyTwin]

Sorry about that, I am at work and when someone needs me I got to run and forget what I am typing. 202/202 cam, PTE front mount, stock heads, th350 with a B&M 3600 stall. Oh, I will be adding a 70mm throttle and plenum from accufab with a rjc power plate this week.