which roller rockers

[gnbeginer]

ok - so I am at the point on my engine build that I need to decide what roller rockers to use. I have a set of 14 bolt GN1 heads, a set of sbc style 1.5 roller rockers and a set of 1.6 roller rockers. Was on phone with tom from champion this morning and he recommends there scorpion set up(285.00 retail). Because of the slight offset on these heads - I am wondering which to use. Could I run the sbc style and be ok with em or jus go ahead and get the scorpions set up? any comments or opinions would b helpful.

 

[1fastcobra]

Tom knows best. U may be ok but why chance the heads.

Posted from the TurboBuick.Com mobile app

 

[gnbeginer]

thanks cobra. After long discussion with Earl Brown - I'll guess I'll be buying scorpion rockers.

 

[1fastcobra]

No problem sir.

Sent from my SPH-L710 using TurboBuick mobile app

 

[earlbrown]

Earl said to mock it up first and see if your really need different rockers!!!

 

[gnbeginer]

Earl also said the side load on em is a bad thing. So new rockers it is.

 

[kennygn1]

i have a set of scorpion rockers they have about 2,000 miles on them if your intersted

 

[gnbeginer]

Interested - pm me with price