will a 18x11 fit?

[Dutchboy]

Just curious I found some really good billet wheels that I like and they are 18x11 and 18x8... what will I need to make it work, if it will what will the back spacing need to be?

 

[xcessiv6]

If the frame isn't notched they will stick out the BS for a 10" wheel is 4.75

 

[84TXGN]

I don't think you can get them to fit at all without a frame notch. Even if you run less backspacing you'd hit the outer fender too easily.

 

[Jack Flash]

18x11

Question guys ?? Will the 18x11 fit with frame notch. And if so what b/s would be required?

 

[Dutchboy]

TY jack thats is the question

 

[John Wilde]

Question guys ?? Will the 18x11 fit with frame notch. And if so what b/s would be required?

You could probably make it work with a 5.5 to 6 in BS.
Dusty has 15x11 on his car, I think the bs is 5 5/8.

 

[T-CHRGD]

the BS for a 10" wheel is 4.75

This is it for most. I am running 17 X 10 , 4.75 B.S. Will need to roll the fenders (car is Lowered). It's tight on both sides, but it Will work. If you notch the frame 1", go 5.75 B.S. If you notch more, then split the difference (over the first inch). :biggrin:
Don't you just love this New Math