Wiring question for a fuel pump and boost controler

[larry33kc]

I have a Fuel pump and Boost controler, and it need to be wired to a Tach lead. Where would the best place to wire that be? TIA

 

[larry33kc]

Any ideas?

 

[pacecarta]

behind the alternator is the tach feed , should be taped to the harness along with the fuel prime .
the tach connector is a male spade , needs a female spade to connect

 

[Dabigguy]

behind the alternator is the tach feed , should be taped to the harness along with the fuel prime .
the tach connector is a male spade , needs a female spade to connect

If I remember correctly it will be a green connector.

Here ya go !!!

http://www.turbobuick.com/forums/ge...e-do-these-two-wires-go-anywhere-nowhere.html

 

[larry33kc]

Yea I don't think I have that wire. My car is running BS3 and I think the harness has been cleaned up a bit. I have looked and haven't seen it. Is there any place else?

 

[pacecarta]

you can tap in at the ignition module harness
pin E , 5th wire from the firewall is tach out to the dash

 

[larry33kc]

Can you explain more? I don't understand.

 

[larry33kc]

Anyone?

 

[autocheckman]

mines not like that

 

[GNRick]

White wire coming out of ignition module.