Wiring: Scanmaster for XFI

[Jerryl]

Does anyone know if the wiring is correct for Scanmaster 2?

Scanmaster is not communicating KOEO. Unit powers up but values are mostly 0.00. PC connection works fine.

 

[pacecarta]

you need a scanmaster 3 XFI to connect with XFI

 

[Jerryl]

Thanks Doc. Typo error on my end.

This is ScnMstr 3. Purchased with low miles and came from a XFI 2.0 car.
Don't think this guy would have sold it to me if it was bad.

 

[pacecarta]

ill have to check my wiring in the 87x , on that car i have sm3 wired to plug into the com cable that i use for the PC

 

[pacecarta]

mine is wired the same as yours and you also need 12v switched to the long red power lead
i;ve had issues with the sm3 display but not all zeros and twisting the case seemed to make it work ,
just send it to bob bailey for a checkup

 

[Jerryl]

Posting feedback in the vendor section to publicly thank Bailey Engineering for a killer product, and product support!