Search results

looks like this has 7mm hex head the threads are about 1 1/8" long and about 1/8" in diameter

OK I'm using a 3bar ,boost gauge reads 25psi scanmaster shows 26.9psi

How accurate are boost numbers using scanmaster and power logger?

Thank you all for your help!!!

ad claims Renegade Pro-100% Methanol

Has anyone heard of Renegade pro methanol? Can it be used with Alky Control system?

I would like one (1) email sent thanks

It is It is 7 shooter see this link http://www.installationinstructions.com/FYI/7shooter.pdf

Does anyone have a picture of the PCB connector that has to be cleaned with goof off when modifying the ECM per Power logger installation guide

Do you have a picture of this repair showing where to epoxy? Thanks

Liked & Shared

Try this http://www.gnttype.org/techarea/bodygauges/antenna_supl.html

I just installed the aluminum blower motor wheel from auto zone $12.99 plus tax part number 35601. much better air flow due to the angle and shape of the blades. Mine made contact at the top of the housing so I just lowered the cage a little on the motor shaft.

I just ate what?

My GN has 5 14 87 on frame above the differential, 5 14 87 on the drivers door sticker, 5 14 on the build sheet that I found in the drivers door and it is also on the ignition module passenger side 5 14 87

On a rubbish truck "satisfaction guaranteed or double your trash back"

Thanks, looking at the fuse panel and the CCCI is 10amp and the ECM is 10amp so I'll be using 10amp.

What amp fuse or fuseable link?

in

If the handle is wobbly then more than likely the plastic at base of the T handle is broken and the only thing holding it on is the flexible vinyl cover. The grinding noise is probably pieces of broken plastic.The white piece extending from the shifter stalk can be turned either in or out to...