Thanks for the info on the clip. I fixed it. The filter is a bit loose though. The tube is fairly long so i'm assuming that once the pan is back on it will keep it in place.
thanks
D
View attachment 168310
Yes i have an external trans cooler.
D
I just ordered this pan here. It comes with the 700r4 filter, gasket and bolts and washers.
http://www.summitracing.com/parts/HUP-HP3880/
D
Your welcome; looking at the picture I can't tell if the pan has a drain plug or it's part of design.thank you. I canceled it and ordered this one.
http://www.jegs.com/i/Hughes Performance/512/HP3880/10002/-1
I knew one of them had the correct filter. That's what I get for rushing.
thank you for spotting my error.
D
I hear what you're saying, but won't the temp sensor be sticking down too long? You might want to do a trail fit and see if the temp will hanging too low for ground clearance. Just a thoughtIt appears to be a drain plug. I'm going to install a temp sensor so if it doesn't have a plug i'll put one in at the same time
thanks again
D