My first 86 gn. Was fast when I first purchased it. Started seeing boost loss. Wot I get 10 psi and then it feels like it just lags and redline. Installed remanufactured turbo, hp wastegate, accel coil pack, msd 8mm wires and acdelco plugs and fuel filter and oil. Coil pack and plugs were done about 5 months ago. Turbo and wastegate was last week.
After turbo install I started getting very bad start ups. Have to crank maybe 4 times to get my goodnight to start.
When trying to read codes with obd1 it doesn't read at all. NOTHING! I have a scanmaster but it's not reading 90% of the time. It won't stay on long enough for me to record any readings. POSSIBLE PCM PROBLEM?
Changed a dash bulb a couple months back and I noticed when I turn on my headlights the right turn stays solid but blinks when turn signal applied. Installed new light switch still same problem.
SORRY THIS MY FIRST GN AND IM LEARNING AND OPEN TO LEARNING.
Any help is appreciated!!
After turbo install I started getting very bad start ups. Have to crank maybe 4 times to get my goodnight to start.
When trying to read codes with obd1 it doesn't read at all. NOTHING! I have a scanmaster but it's not reading 90% of the time. It won't stay on long enough for me to record any readings. POSSIBLE PCM PROBLEM?
Changed a dash bulb a couple months back and I noticed when I turn on my headlights the right turn stays solid but blinks when turn signal applied. Installed new light switch still same problem.
SORRY THIS MY FIRST GN AND IM LEARNING AND OPEN TO LEARNING.
Any help is appreciated!!