Recent content by IATurboBuick

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. IATurboBuick

    Trunk Trim Plastic

    I need the inner plastic hanger for the inside of the trunk trim to hold it up
  2. IATurboBuick

    Injectors

    Everything is sold.
  3. IATurboBuick

    Cruise Module (Rebuild?)

    No i mean the circuit board
  4. IATurboBuick

    Cruise Module (Rebuild?)

    does anyone rebuild the cruise modules?
  5. IATurboBuick

    Boost Control

    TA 3" interbal gate, yes on porting. Its a new Work 6262
  6. IATurboBuick

    Fuel Tank Sending Unit

    Well, thanks to few people who reached out, I have a resolution. I have leaned about the wire harness, thats for sure, but the fix was actually easy, but thats easy to say now. When I pulled the alky kit and harness, I had used a rubber grommet to hold the low fuel bulb in the assesory...
  7. IATurboBuick

    Fuel Tank Sending Unit

    OHMS are 43 between ground and signal at the sending unit which would be about right for how much fuel is in it. I wonder if my needle on the dash buried and just needs to wake up or get cleaned.
  8. IATurboBuick

    Fuel Tank Sending Unit

    I ran it through its progression physically, but its almost like it simply stopped working. no wires were damaged pulling the sender its pretty straight forward. I am unsure of how to find the "signal" No I haven't contacted a vendor because I am simply looking for some immediate help...
  9. IATurboBuick

    Fuel Tank Sending Unit

    I have a racetronix 550 pump setup. I changed to e85 which I decided to pull the sender and completely drain gasoline and any debris before filling with e85. It was that simple of a process, and now my fuel gauge reads zero. I pulled the tank back out and confirmed my sending unit was...
  10. IATurboBuick

    Boost Control

    I have been working on this project for awhile now. You can see my mods in my signature of my 86. I have a TIAL MVI2.5 adjustable spring wastegate actuator. Actuator rod is short as possible which gives 1/16 preload onto by puck arm in the downpipe. When I follow the spring rating Tial...
  11. IATurboBuick

    Injectors

    MAF and 60’s are sold. 80’s still available.
  12. IATurboBuick

    Injectors

    If it had 750 miles I’d be surprised.
  13. IATurboBuick

    Injectors

    I have 2 sets of Turbotweak Injectors that have less than 1,000 miles on each set. 60's-$200–SOLD!!!!! 80's-$400 Both are high impedance and ran 93 octane fuel. The 80's are still in my rail so I don't have pics but I will get them pulled tonight or tomorrow. Will ship them for $12 Also...
  14. IATurboBuick

    220 injectors e85 fuel pressure issue

    I hate to waste peoples time and I wanted to express the thanks to the people who replied. I made a mistake and I had the ECUGN guages reading the alternative input from oil pressure to fuel pressure. So this was a calibration mistake I made. all is fine now.
  15. IATurboBuick

    220 injectors e85 fuel pressure issue

    thanks, we had not seen thayt when we ordered them.
See more

Online statistics

Members online
12
Guests online
4,672
Total visitors
4,684
Totals may include hidden visitors.

Latest posts

Newest members

Stay Connected

Back
Top