Recent content by OddfireV6

I had a call in to Nick at Electromotive and he basically said the same thing you did except he specifically wanted to know about the 12v switched source...sure enough I just tested it and the voltage upon cranking is going to zero...good call!! I temporarily hooked up another hot wire and the...

Thanks a lot I will test that out and report back!!!

Does anyone have any experience with the TEC3? After having to trouble shoot wiring issues in the harness they provided we've finally got the laptop to link to the TEC3 but now we have a new problem. When we crank over the motor the TEC3 does one of 2 things, it either goes into NO CONNECTION...

That would be tough to do, I haven't worked in over a year so $$ is tight. I'd love to take you up on the offer but I just don't see it happening. I live in Chicago, if you are in the area anytime soon let me know ;) What if I sent you/Lance my SP and e-Dist and see if you can even getting it...

Well I hate to be the bearer of bad news but an Oddfire SP and eDist do not work together...we have tried everything imaginable but the best the set up would do is give a very very weak spark to plugs...despite being told if the eDist box is getting both signals then the eDist is working, well I...

Yet another night of frustration...we did have one wire incorrect, we didn't have the negative side of the cam signal going into the eDist but we fixed that and we did see spark but it was very inconsistent and very very weak. At times we wouldn't even see 3 EST signals on the O-Scope for every...

Hi Craig thanks a million for the quick response...we already verified that their are no signals coming out of the eDist with the o-scope, we only had one good lead for the scope so we could only check one thing at a time but tomorrow we will have 2 leads so we can make sure that cam and EST...

OK big thanks to the FAST crew for getting my Speedpro modified to accept Hall Effect signals and back to me in two days!! Lance, Craig, Tony, and Mike have all been great. Unfortunately we still don't have a running truck...here is what we have and don't have...we installed the MSD Cam Plug PN...

Hey Craig you are right that is my CPU on the Oddfire and as far as I know we will have the first Oddfire V6 eDist set up...I never heard from Kevin C....so I'm hoping he shipped the box back next day if not hopefully he does today (Friday) I'm paying so don't worry about the cost I just need...

Thanks again DocJ, I read that post and for the most part I knew everything that was being discussed there...however you mentioned that you had a link that shows some of the work/schematics you've done can you give me that link? Or forward them to my email Raketich@sbcglobal.net? Thanks

Thanks DocJ I didn't expect many responses on this one but you definitely helped out. Once we get it running I'll update everyone on what actually worked.

Well I can speak from some experience...it definitely isn't the cheap option but if you're making some serious torque and want to launch hard and have 4 gears it is the way to go. I'd rate the trans on its abitlity to take torque not HP once you're making mad HP you're already on the roll...

Well I've read all the e-Dist posts I can find and I really think we are very very close to getting the e-Dist to work with my Oddfire SpeedPro box but we need to do one of the following things. Either 1) Send the SpeedPro box back to FAST and have them set the cam sync input set to read Hall...

Re: i will look into them more ! What good are they? How about 625HP and 700LBS of torque on 10PSI @ 6000RPMS with 18 degree heads, FAST, and T76. Granted this is with lower compression of 8.5:1 but switch to a T88 running 25PSI and 7500RPMS and I'm betting your making over 900HP and...

Hey Red...Cool so we did use the ECU signal, so that's not it hmmm, yeah we should go over all the wiring again to make sure everything is as needed. Maybe I just need to be holding the coils in my hand for the system to work :D Please don't try this at home ladies and germs....