Recent content by Procharged GTA

We have a 2004R we are building and have a question about checkball placement (in the case) we are using CK's seperator plate.... and the mods in the valvebody are from the Trango 2004R-HD kit along with CK's new GM bluprinted pump with billet rotor and. 555" boost valve. I contacted Chris and...

I definatley will Todd....and thanks for the help!! :)

Ok....thanks Bison... could you explain to me why failure happens? As you know... we have been having a noise problem.... and close inspection of the pump....we found we are running a casting #150 back half of pump combined with a casting 082 (gear side of pump), but we did modify our solid...

Yep.....that is the one I'm talking about..... can the back half of the pump casting 150(the one with the stator bolted into it) be used with the other half of the pump...casting 082(which consist of the pump gears,rotor and so on). Bruce states that the casting 150 casting pump half can ONLY be...

Bruce "WE4" talks about it in the "pump" section of "Strengthening the 2004R" above in the sticky....

No....the stator half of the pump...

Hi guys.....I have a simple question here regarding the different years of 2004R pumps. Is there any adverse effect when using a early 150 casting stator with a later 082 pump body as long as you modify the solid regulator valve with flats? The reason I'm asking is because I read here that the...

Ok.....I think we have come to the conclusion that it must be hydraulic noise...I called Chris at CK.....at explained everything to him too...and he said it is pump noise related also... so I went ahead and ordered a NEW blueprinted GM pump from him....hope this fixes our noise problems!! :)...

12 rib setup...... anybody have any other opinions on the tranny?

We also had a white PR spring in it.....that's what the Trans Go papers say to use.....is this the correct color?

Ok...we have been inspecting a little more this morning....and I had read on here about Pressure Regulator valve mods that's in the pump....we forgot we had done this.... we ground off the PR valve and put a flat at the end of it.....and i have read that can wipe out engine thrusts and...

Hi SSedan.....just end play in the planets.... no detectable wobble.... we were thinking it was the planets also....it just seems way to loud to be pump noise...but we could be wrong.... I read a lot of people having pump noise on here....but its usually described as a "buzz" or "power steering...

Thanks for the fast response Bison..... what would be causing the pump to make noise in manual low and manual second....but not 3rd and overdrive? What in the pump would cause the noise? Thanks again....

Hi everyone....awhile back we rebuilt our 2004R and it shifts great and everything...but we have been chasing a "resonate" sound that seems like it comes right through the body of the car...alot of interior noise...like a "whirling" sound....similar to a locked up fan clutch or something. We...

Well, we got the tranny put in,and it works excellent!! The shifts are nice and solid,but not real harsh. It shifts as soon as you move the shifter,no delayed shifts!! The Continental 10" non-L/U converter works amazing!! It feels just like a stock converter taking off,but when you stomp it wide...