Recent content by rxmartin

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. R

    Accumulator ?

    Well here is the story again. I burnt up my first pm motor back in August. So I ordered a new motor from hank and accumulator from the dealer. Drove the car and the motor burnt up again a day or so later. Called Hank back and I bought a third motor. Before I put this one in I also purchased...
  2. R

    power master

    I changed the fluid when I changed the motor. I have a rebuild kit on the way and I am getting another motor. I hope this does it. I am also going to replace the hoses and switch and proportioning valve. Thanks Again Kevin
  3. R

    power master

    I know this is seems like a brake question but its actually electrical. I keep blowing the pump out on my power master. The first one kept blowing the 30 amp fuse and the motor itself stunk of electrical burn smell. So I e-mailed hank for a new motor. I got it, put it in. I bled the new...
  4. R

    What do you guys think??

    Ok I did some more exploring with the help off eric and I found that the one check valve(pcv valve replacment) I bought from poston was passing to much air so it leaned my idle out to much. So I am going to get a reg. delco pcv today and see what happens. As for the first gear boost spike I...
  5. R

    What do you guys think??

    Hey guys, I did port the the wastegate out just a little with a dremel. I just open it up a little bit around the carbon template. Do you think I just open it up more. I am using ATR dp and it has a larger puck on it. As for the BLM on the freeway and cruising they are sitting around...
  6. R

    What do you guys think??

    I had just finished up putting together my 87 gn. Here is what I did....ATR cold air intake, 36# delphi injecotrs, 160 thermostat, ATR wires and delco plugs, Poston Adj. Fuel Reg set 43psi Static, 3" Atr SS Downpipe with ss High flow cat and Borla Catback, upgraded intercooler hoses, Poston...
  7. R

    ECM Tuning ?

    I know what stock levels are I just need to know if I need a custom chip for what I am doing or can just use a red armstrong chip 93.
  8. R

    ECM Tuning ?

    Hey everyone, I am new to the board and I need some help with my 87 Grand National. Here is the problem I purchase this car with a cam already installed. The guy who had the cam put in forgot the size of it. The car passed tail pipe test with no problems and still has a good idle. So I am...
See more

Online statistics

Members online
14
Guests online
2,692
Total visitors
2,706
Totals may include hidden visitors.

Latest posts

Newest members

Stay Connected

Back
Top