I know this is seems like a brake question but its actually electrical. I keep blowing the pump out on my power master. The first one kept blowing the 30 amp fuse and the motor itself stunk of electrical burn smell. So I e-mailed hank for a new motor. I got it, put it in. I bled the new motor exactly like it said and I even checked the system, time of brake light on and time of motor on. The light went off after 5 sec. and the motor off after 9-10 sec.. I checked to make sure that it didn't turn on after 2 min. and it was fine. I also replaced the accumulator and I checked the grey pressure sensor. All that was good. Then I drove it around the block and the pump motor blew out agian and it had the same electricla burn smell. Now it will blow the fuse evertime I put it in. Does anyone have any idea why this pump keeps dieing. Finally I also checked thefeed and high pressure hoses for kinks and I checked the brake fluid level. Everything else was good.
Damn things.............
Thanks for the help

Thanks for the help