You can type here any text you want

Recent content by Warp6

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
  1. Warp6

    Aftermarket Stainless Steel Down pipe temp.

    I just looked at your picture. You're showing the header flange where it meets the head. Remflex there too, remflex for turbo to header 3-bolt and remflex for turbo outlet to dp. I realize there was no gasket in these spots from the factory but over time these areas can be problematic and the...
  2. Warp6

    Aftermarket Stainless Steel Down pipe temp.

    In my opinion, the remflex gasket is the better option. I have run one for years with no issues. I've tried them all, copper, red rtv etc. While you're at it, stud your turbo where the dp connects. It'll help with future removal. Those bolts can get janky and difficult to remove, sometimes they...
  3. Warp6

    Aftermarket Stainless Steel Down pipe temp.

    Here's a decent fix https://buickgn.com/remflexinternalgate.jpg
  4. Warp6

    ATR pitbull crossflow exhaust

  5. Warp6

    ATR pitbull crossflow exhaust

    I have that system. When I installed my Ridetech suspension it created interference with the passenger side suspension. I ended up capping the passenger side entry to the muffler for a temporary fix. Been on there 4 years running as a single side exhaust. My muffler sits kinda vertical at...
  6. Warp6

    Not Sure How To Feel About This

    I can only think the song will draw eyes to something they might have never known existed. It might just make the cars even more desirable. I haven't heard the song. The second thing I noticed from your attached picture was the number of this artists followers. That's 16.5 million people with...
  7. Warp6

    Do I need to remove my hood to remove my engine?

    I made a solid strut to replace the hood shocks. It's longer than the hood shocks to keep the hood vertical. Only need 1 and it's super easy to make
  8. Warp6

    Vacuum block alternatives.

    I have the Cruz kit on my 86 GN and it's really nice. There's a lot of bang for your buck in this kit
  9. Warp6

    Header Panel cracked where grill mounts

    My header panel broke just like yours. A buddy fabricated some wide clips for me and welded a 1/4-20 nut to the back side. My clip is 1 1/4" wide by 1 1/4" deep. It's just a large pinch clip. I used 3 of them and they work great
  10. Warp6

    Belly pan/drip pan

    Man, that is really cool
  11. Warp6

    various ALKY pump test results inside for general FYI

    Under the dash, at three wires on PAC controller - red/white/black - black is a hot wire Probe the black wire, and test with a voltmeter. One lead goes to black wire, one goes to ground Key on, the black wire should read car voltage which should be about 12.5v. Turn controller knob to 8 and...
  12. Warp6

    various ALKY pump test results inside for general FYI

    Man, I honestly don't know if it's a new style or not. I don't know the difference. The tested pump was installed February 2021. Can you show me what the old style looks like?
  13. Warp6

    various ALKY pump test results inside for general FYI

    I tested a new ALKY Control pump a while ago and posted my findings here. I can't seem to locate them on the site. Having seen multiple questions about pressures and voltage I figured I'd post this up again
  14. Warp6

    Can't Compete with This

    Mr. Michael, nice toy box you have there. Cleaner than most people's homes. Cheers!
  15. Warp6

    Bobby Labonte Sig. Series GN

    Bought my very first GN there in 88. It had been crashed and repaired. Getting them to buy it back was nearly a disaster for me. I remember seeing a Bobby Labonte signature car in the showroom. They had a GNX too. Stickered at $33,xxx
See more

Online statistics

Members online
25
Guests online
948
Total visitors
973
Totals may include hidden visitors.

Newest members

Stay Connected

Back
Top