15 x 10 with 6" backspace

[johnplogii]

Any one run this wheel? Frame is notched to the seam. 28 x 10.50 mt's.

Thanks

 

[Louie L.]

Notched only to the mid frame seam is not going to work on that wheel. If the rear is equipped with quality wheel studs you could use good spacers to get it in the right spot. I used to run a 15x10 5in bs with the same tire. There was about 1/2 in clearance at the frame rail.
Check out the pic below.

I now run a 15x10 with 5.5 bs and a 1/8 spacer with a 28.5x10.5 slick. No pics of that but its tight.

 

[johnplogii]

Thanks louie, I think I will try to find some with 5" backspace. I hate using a spacer as I have bent wheel studs using a spacer before.

John Plog