15x10" wheel update

[qwknuf6]

Well there is good news , the 15x10" centeline telstars w/28x10.5 MT ET Drags did not rub , no mods to the frame or the fender lip . I do run and need a air bag on the pass side . The car is not centered on the frame and the Slick is about 3/8 closer to the fender lip on the pass side than the dr side , no problems w/frame at all .

Bad news is due to a failed T/C I was not able to launch very hard at the track ,1.6 60 ft was the best but no rubbing there ,as soon as the T/c and tranny come back I will see what happens on a 1.4 60ft launch .

Here is a link to a pass at the track ,chk out the rear slicks ...http://www.jagracingphotography.com/00000011.jpg

Mark

 

[Slow91z]

Please post your backspacing ## those are the wheels I want.

 

[qwknuf6]

4.5" bs

 

[Slow91z]

Sweet

 

[Billdogg]

That looks sweet! What metric size tire is that equivalent too? 315 or so?

 

[qwknuf6]

Not sure what metric size that might be , 11.7 " section width for the 28x10.5 slick ,my 275x40 tires have s 11.2" section width.
Mark