1984-85 Hot air engine

[DOUBAD RACIN1]

Look 4 a 1984 or 85 grand national hot air. it could be long block or short block I live in Alabama looking for something near at a good reasonable price will pay shipping

 

[conn84gn]

I am in Connecticut but...
I have a 84 engine rebuilt .020 over forged pistons ported heads valve job done 2000 miles ago block is cut and threaded for 87 style turbo drain
I had it in my 84 GN, took it out and put in a RPE engine
the 84 engine has a 218/218 cam but I have a roller cam/lifters that I had planned to put in it
I spent over $5000.00 to built it not sure what I want for it

 

[boostjunkie]

I have a stock 89.000 mile motor still in a 1984 GN can hear run ! In Pittsburgh pa 15025

 

[DOUBAD RACIN1]

Sou

I am in Connecticut but...
I have a 84 engine rebuilt .020 over forged pistons ported heads valve job done 2000 miles ago block is cut and threaded for 87 style turbo drain
I had it in my 84 GN, took it out and put in a RPE engine
the 84 engine has a 218/218 cam but I have a roller cam/lifters that I had planned to put in it
I spent over $5000.00 to built it not sure what I want for it

Sounds lovely
just a little out of my budget but would love to have that setup

 

[DOUBAD RACIN1]

I have a stock 89.000 mile motor still in a 1984 GN can hear run ! In Pittsburgh pa 15025

What would u take for it....

 

[boostjunkie]

I have a stock 89.000 mile motor still in a 1984 GN can hear run ! In Pittsburgh pa 15025

What would u take for it....

$1100 I can take a video of the car running with cold start before removing it

 

[conn84gn]

I am in Connecticut but...
I have a 84 engine rebuilt .020 over forged pistons ported heads valve job done 2000 miles ago block is cut and threaded for 87 style turbo drain
I had it in my 84 GN, took it out and put in a RPE engine
the 84 engine has a 218/218 cam but I have a roller cam/lifters that I had planned to put in it
I spent over $5000.00 to built it not sure what I want for it
You would have to port your manifold to match the heads what's your budget?

 

[DOUBAD RACIN1]

I have a stock 89.000 mile motor still in a 1984 GN can hear run ! In Pittsburgh pa 15025

$1100 I can take a video of the car running with cold start before removing it

I only need the long block...
Dont need nothing more....

 

[DOUBAD RACIN1]

I am in Connecticut but...
I have a 84 engine rebuilt .020 over forged pistons ported heads valve job done 2000 miles ago block is cut and threaded for 87 style turbo drain
I had it in my 84 GN, took it out and put in a RPE engine
the 84 engine has a 218/218 cam but I have a roller cam/lifters that I had planned to put in it
I spent over $5000.00 to built it not sure what I want for it
You would have to port your manifold to match the heads what's your budget?

Honestly 2k is my budget,
Just put 5k in my hole buid and spun a baring in mine....

 

[GNXJohn]

Honestly 2k is my budget,
Just put 5k in my hole buid and spun a baring in mine....

Have one 81k miles complete $800.

 

[GNXJohn]

Have one 81k miles complete $800.

Have one 81k miles $800 complete

 

[precizion818]

I have one in N.C. that I am about to pull.


Sent from my iPhone using Tapatalk

 

[DOUBAD RACIN1]

Have one 81k miles complete $800.

would you Ship....