1986 GN Digital Climate Control round 3. Blower motor issues

Welcome!

By registering with us, you'll be able to discuss, share and private message with other members of our community.

SignUp Now!
Joined
Jan 31, 2006
Messages
8,819
Round One - Was done the "right way" expensive parts, spoke with gurus, and it was a total failure.
Round Two - Was Ebay PWM supposedly rated at 30 amps worked great for a short period of time but also failed.
Round Three - look at the picture and take a guess. I'll give you a hint "Frankenstein" Also purchased a new blower motor as per one of the gurus putting the failure blame on the OE motor and not expensive parts (doubt it but another $45.00 fck it)
 

Attachments

  • 20190516_065319.jpg
    20190516_065319.jpg
    3 MB · Views: 49
067726e3e77796e1a33113b1c56f67e9.jpg


When you say round 1. Was the right way did you use this? I didn’t want to spend the money on it but I did and it fixed mine.


Sent from my iPhone using Tapatalk
 
067726e3e77796e1a33113b1c56f67e9.jpg


When you say round 1. Was the right way did you use this? I didn’t want to spend the money on it but I did and it fixed mine.


Sent from my iPhone using Tapatalk
YES i did = junk. At least in my car or my car is the junk either way it did not work.
And also swapped the dash controller for another supposedly known working unit from another guru and still nothing.
 
I installed the caspers blower module on my 84 and it seems to control the blower just fine. Dont have a compressor or vacuum canister yet so cant verify everything.
 
Back
Top